The Yamaha XMV4140 power amplifier can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously, eliminating the need for additional equipment, as well as streamlining the installation process. Installed sound applications often demand both high and low impedance connectivity in the same venue, requiring separate, dedicated amplifiers or an external transformer.
Specifications
Output Power 1kHz, THD+N = 1% (20 ms Burst)
4Ω:140W x 4
8Ω:140W x 4
4Ω/ Double Power Mode:280W x 2
8Ω/ Double Power Mode:280W x 2
High impedance
100V line 125W x 4 / 80 Ω
70V line 125W x 4 / 40 Ω
Voltage Gain
RL=8Ω 28.7dB
RL=8Ω / Double Power Mode 31.7dB
100V 38.2dB
70V 35.2dB
Input Sensitivity
RL=8Ω +4dBu
S/N Ratio
A-weighted ≥ 100dB
Power Consumption
1/8 power (4 Ω pink noise) 150W
Idle (4 Ω) 37W
Standby 18.5W
THD+N 1kHz, half power: ≤ 0.2%
Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz 0dB, ±1.0dB
Crosstalk
1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt :≤ -60dB
Maximum Input Level +24dBu
Input Impedance 20kΩ (balanced), 10k Ω (unbalanced)
Connectors
Analog Input Euroblock x 2 (6P, balanced)
Digital Input / Output RJ45 x 2 (YDIF IN / OUT)
Speaker Output Barrier strip x 4 pairs
Network RJ45 x 1
Remote, Fault Output Euroblock (3P) x 1
AC IN AC Inlet x 1
Protection circuit
Load Protection POWER switch on/off: Output mute,
DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C)
(Restored automatically),
Overcurrent: Output mute (Restored automatically),
Low load impedance: Output mute (Restored automatically)
Power Supply Protection Thermal: Amplifier shuts down automatically
(heatsink temp ≥100°C)
Integrated power: Gain reduction (Restored automatically)
Cooling Fan 3-Speed fan x 2, front-to-back airflow
Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Packaging Info
Dimensions (W x H x D): 480mm x 88mm x 422mm
Net Weight 8.1 kg
What’s in the Box
- XMV4140